Thu
Oct 22
2015

Dural Durosol 5 mil Square Edge Profile Aluminum Annodized Silver

Dural Durosol 5 mil Square Edge Profile Aluminum Annodized Silver

Durosol Finishing Profiles for Ceramic Tiles

Straight-edge tiling profile for wall and floor

Made in Germany

Durosol-5mil-cap img Durosol-5mil-dimension Durosol5mil img

Height: 2 – 50 mm.

Material:
PVC, Aluminium, Brass,
Stainless Steel – available
in different colours and
variations.

Edge is 3/32" thick. Please choose profile height from pull-down menu.

Application:
DUROSOL square edge profiles by Dural were especially developed for protection of tile edges. They are suitable for all domestic and commercial areas. Because of their special angle and different materials, it is possible to provide edge protection even in areas of permanent and strong stresses. These special profiles were designed to transfer impact stresses uniformly into the tile covering and base material. This minimizes the chances of damage to the decorative covering. Besides the protective function, the DUROSOL Square edge profiles also meet the highest decorative requirements. They provide clean transitions and limits, e.g. between carpet and parquet. They can be used as edge protection as well as for surface definition.

Material:
DUROSOL Square edge profiles are available in the following versions: brass natural, brass high gloss finish and chrome plated, aluminum natural, aluminum anodized and aluminum powder coated, stainless steel and stainless steel with high gloss finish.

Properties:
Special profiles of brass are also applicable in industrial structures. They are resilient to high point loads and are mostly resistant against chemical substances occurring during tile fixing. Important: brass oxidizes when exposed to air, especially with high humidity. The surface is covered with a patina (protective layer) thus changing the appearance.

DUROSOL Square edge profiles in aluminum are used in applications where no exceptional chemical reaction is expected. Careful handling of cement materials is required to avoid corrosion. All residues of mortar, tile cement or joint cement are to be immediately removed from all visible surfaces because aluminum is sensitive to alkaline medias. The profile is to be completely embedded into the contact layer. This avoids cavities to generate where alkaline water might accumulate.

DUROSOL Square edge profiles of anodized aluminum are of special refinement and therefore the surface is usually not subject to changes. The visible surfaces however, have to be protected against any cement materials. Damages can occur because of scratching or abrasive objects.

DUROSOL Square edge profiles of stainless steel are especially suitable for areas subjected to high stresses due to chemicals and acids. They meet highest requirements of resistance to mechanical impact. Stainless steel profiles are used in foodstuff industry, swimming pools, in hospitals and breweries (V4A - 1.4571). For all materials the following is valid: The suitability with respect to mechanical and chemical resistance is to be examined for each individual case.

Handling:

  1. Select the DUROSOL Square Edge profile according to the thickness of tiles.
  2. Apply tile cement in the appropriate area using a notched trowel. In the case ofexternal corner edges, first finish tiling of one wall.
  3. Press the DUROSOL profile into the cement bed and align.
  4. Completely cover the fixing legs.
  5. Leaving a joint of 2-3 mm between tiles and profile.
  6. Press the tiles solidly into the cement bed and align flush with the upper profile edge.
  7. Completely fill the space between tiles and profile with joint mortar.

Care and Maintenance:
DUROSOL angular closing profiles do not require any special care. Oxidation layers on brass and aluminum profiles can be removed with polishing compounds. A permanent removal however, is not possible.
For profiles of special steel it is recommended to use chrome polishing solution. It will provide for a bright appearance. Special steel profiles exposed to very aggressive mediums should be cleaned from time to time with mild cleaning materials. The cleaning materials have to be free from hydrochloric acid and hydrofluoric acid and must not be abrasive.

Previous Posts

Sink Corner for Schluter RONDEC - Anodized Aluminum

Connector for Schluter DILEX-EHK

Connector for Schluter RONDEC - Stainless Steel

Inside Corner for Schluter RONDEC-STEP

Schluter Ditra Heat 240V Heating Cables

Pro 32 x 60 Inch Offset Drain Shower Pan for Shower Systems

Pro 32 x 60 Inch Center Drain Shower Pan for Shower Systems

Outside Corner for Schluter BARA-RTP

Rectangular Shower Bench BB-ADJR

Mark E Quick-Pitch Quick-Clip Schluter Kerdi and Noble Attachment

Schluter Systems Kerdi Waterproofing Outside Corners

Pro Shower Drain Kit for Shower Systems ABS or PVC

Schluter Systems Kerdi 4-1/2 Inch Mixing Valve Seal

Dural Durabase WP Waterproofing Seam Strips 7 Inch 16.5 Foot Roll

Schluter Systems Kerdi Shower Ramp SR122

Schluter DILEX-AHKA Anodized Aluminum Cove-Shaped Corner Profiles

Pro Solid 3 Foot Shower Curb

Pro Corners Inside Waterproofing 2 pk

Pro Advanced Custom Tile Mud Kit up to 30 x 60 Center in PVC or ABS

Schluter KERDI-LINE Linear Drain - Center - B Grate - 3/4 Inch Frame

Schluter KERDI-SHOWER-L/-LS Sloped Tray For KERDI-LINE

Dural Durabase WP WPFX Outside Corners 2 Each

Schluter Systems Kerdi Shower Drain Kit - 6 Inch Grate

Schluter KERDI-LINE Linear Drain - Offset - All Grates

Pro ABS 32 x 60 Offset Drain Shower Waterproofing Kit

Dural Durabase WP Waterproofing Seam Strips 7 Inch 33 Foot Roll

Dural Durabase WP Waterproofing Seam Strips 5 Inch 98.5 Foot Roll

Pro Advanced Waterproofing 32 x 60 Center Drain Tiled Shower Kit

Pro Advanced 72 x 72 Custom Tiled Shower Kit in ABS or PVC

Schluter Systems 32 x 60 Inch Center Drain Kerdi Shower Kit

Schluter RONDEC STEP Anodized Aluminum Finishing and Edging Profiles

Ebbe Shower Floor Drain Square Metal Grate Cover

Dural Durabase WP Waterproofing Seam Strips 10 Inch 16.5 Foot Roll

Noble Sealant 150 Waterproofing Sealant and Seamer

Trowel for Installing ProVa-Matte

Schluter Systems 48 x 48 Inch Kerdi Shower Kit

Schluter KERDI-LINE Linear Drain - Center - B Grate - 1-1/8 Inch Frame

Schluter KERDI-LINE-FC Cover Plate

Schluter Systems Kerdi 1/2 Inch Pipe Collar Seal

Schluter DILEX-EDP Stainless Steel Surface Joint Profiles

Schluter KERDI-LINE Linear Drain - Center - D Grate

Pro Solid 4 Foot Shower Curb

Schluter Systems Kerdi Fix

Pro 48 inch Shower Pan for Shower Systems

Pro Matte Waterproofing System per SF

Schluter Systems 32 x 60 Inch Off Center Drain Kerdi Shower Kit

Schluter KERDI-LINE Linear Drain - Center - A Grate - 3/4 Inch Frame

Schluter Kerdi Showe ST Shower Tray 72x72 ST-183

Pro Advanced waterproofing 48 x 72 Custom Tiled Shower Kit

Dural Durabase-WP WPFXI Inside Corners

Schluter BARA-RW Angular Perimeter Finishing Profiles

Schluter RENO-T Floor Transition Profiles

Schluter Shower Systems Kerdi Shower Curb 48 Inch

Schluter DILEX-BWA Perimeter Joint Movement Profiles

Schluter Systems Kerdi Waterproofing Seam Strips 7-1/4 Inch Roll

Pro 32 x 60 Center Drain Tile Shower Systems Kit

Schluter Systems Kerdi Waterproofing Inside Corners

Dural Durabase WP Waterproofing Seam Strips 5 Inch 16.5 Foot Roll

Pro 48 x 72 Shower Systems Waterproofing Kit for Tile Showers

Dural Durabase WP Waterproofing Seam Strips 5 Inch 33 Foot Roll

ProVa 48 x 48 Tiled Shower Systems Kit

Dural Durabase WP Waterproofing Seam Strips 7 Inch 98.5 Foot Roll

Shower Liner PVC 6 feet wide per SF

Bathtub Tub and Shower Waterproofing System for Tile Surround

Pro 32 x 60 Offset Drain Shower Systems Tile Kit

Noble Shower Curb Overlays

Dural Durabase WP Waterproofing System per SF

Pro Advanced Custom Tile Mud Kit 72x72 Center or Offset in ABS or PVC

Pro Advanced 48 x 48 Custom Tiled Waterproofing Shower Kit ABS or PVC

Pro Joint Strip 5 Inch 82 Foot Roll

Pro Advanced Waterproofing 32 x 60 Offset Drain Tiled Shower Kit

PVC Pro Drain Kit for Showers

Schluter Systems Kerdi Waterproofing Membrane Sheet

Pro WP Waterproofing Membrane 108 SF Roll

Schluter BARA-RTK Balcony Edging Profiles

Pro Advanced Custom Tile Mud Kit 32 x 60 Offset in ABS or PVC

Schluter Systems Kerdi Shower Tray ST-81/152BR 32X60 Off Center Drain

Pro Matte Waterproofing System 270 SF Roll

Schluter Systems 72 x 72 Inch Kerdi Shower Kit

Noble Solid Shower Curb 4 Foot

Schluter Systems Kerdi 3/4 Inch Pipe Collar Seal

Trowel for Installing Schluter Kerdi

Schluter BARA-RAK Balcony Edging Profiles

Pro Joint Strip 5 Inch 16 Foot Roll

Schluter Kerdi Waterproofing Shower System 323 Square Foot Roll

Pro 72 x 72 Shower Systems Waterproofing Kit for Tile Showers

Schluter Systems Rema Concealed Access Panel

Schluter Kerdi Shower Tray 48x48 ST-122

Pro Advanced Drain Kit PVC or ABS for Tiled Showers

Pro Joint Strip 5 Inch 41 Foot Roll

Dural Durabase-WP Waterproofing Membrane System 270 SF Roll

Dural Duralis Listello Deco Dorado Anodized Aluminum Profiles

Tub n shower Water Proofing Pipe Seal Universal

Pro Advanced Custom Tile Mud Kit 48x48 or 32x60 Center in ABS or PVC

Schluter KERDI LINE Linear Drain - Center - A Grate - 1-1/8 Inch Frame

Pro 48 x 48 Custom Tiled Shower Kit

Dural Durabase-WP Waterproofing System 323 SF Roll

Dural Durabase WP Waterproofing Seam Strips 10 Inch 98.5 Foot Roll

Pro Advanced Custom Waterproof Tile Mud Kit 60x60 Center or Offset

Schluter Kerdi Waterproofing Band Seam Strips 5 Inch Rolls

Pro Advanced Custom Tile Mud Kit 48x72 Center or Offset in ABS or PVC

Dural Durabase WP Waterproofing Seam Strips 10 Inch 33 Foot Roll

Dural Durabase WP Waterproofing Seam Strips 5 Inch 41 Foot Roll

Ebbe Shower Floor Drain Riser and Drain Grate Cover

Schluter Kerdi Waterproofing Seam Strips 10 Inch Roll

Schluter Systems Kerdi Shower Drain Kit - 4 Inch Grate

Schluter Kerdi Shower Pan ST-81/152 32x60 Center Drain